Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal
Branch- Common to All Discipline
New Scheme Based On AICTE Flexible Curricula
BT301 Mathematics-III 3L-1T-0P 4 Credits
OBJECTIVES: The objective of this course is to fulfill the needs of engineers to understand
applications of Numerical Analysis, Transform Calculus and Statistical techniques in order to
acquire mathematical knowledge and to solving wide range of practical problems appearing in
different sections of science and engineering. More precisely, the objectives are:
To introduce effective mathematical tools for the Numerical Solutions algebraic and
transcendental equations.
To enable young technocrats to acquire mathematical knowledge to understand Laplace
transformation, Inverse Laplace transformation and Fourier Transform which are used in
various branches of engineering.
To acquaint the student with mathematical tools available in Statistics needed in various
field of science and engineering.
Module 1: Numerical Methods – 1: (8 hours): Solution of polynomial and transcendental
equations – Bisection method, Newton-Raphson method and Regula-Falsi method. Finite
differences, Relation between operators, Interpolation using Newton’s forward and backward
difference formulae. Interpolation with unequal intervals: Newton’s divided difference and
Lagrange’s formulae.
Module 2: Numerical Methods – 2: (6 hours): Numerical Differentiation, Numerical
integration: Trapezoidal rule and Simpson’s 1/3rd and 3/8 rules. Solution of Simultaneous Linear
Algebraic Equations by Gauss’s Elimination, Gauss’s Jordan, Crout’s methods, Jacobi’s, Gauss-
Seidal, and Relaxation method.,
Module 3: Numerical Methods – 3: (10 hours): Ordinary differential equations: Taylor’s
series, Euler and modified Euler’s methods. RungeKutta method of fourth order for solving first
and second order equations. Milne’s and Adam’s predicator-corrector methods. Partial
differential equations: Finite difference solution two dimensional Laplace equation and Poission
equation, Implicit and explicit methods for one dimensional heat equation (Bender-Schmidt and
Crank-Nicholson methods), Finite difference explicit method for wave equation.
Module 4: Transform Calculus: (8 hours): Laplace Transform, Properties of Laplace
Transform, Laplace transform of periodic functions. Finding inverse Laplace transform by
different methods, convolution theorem. Evaluation of integrals by Laplace transform, solving
ODEs by Laplace Transform method, Fourier transforms.
Module 5: Concept of Probability: (8 hours): Probability Mass function, Probability Density
Function, Discrete Distribution: Binomial, Poisson’s, Continuous Distribution: Normal
Distribution, Exponential Distribution.
Textbooks/References:
- P. Kandasamy, K. Thilagavathy, K. Gunavathi, Numerical Methods, S. Chand & Company,
2nd Edition, Reprint 2012. - S.S. Sastry, Introductory methods of numerical analysis, PHI, 4th Edition, 2005.
- Erwin kreyszig, Advanced Engineering Mathematics, 9th Edition, John Wiley & Sons, 2006.
- B.S. Grewal, Higher Engineering Mathematics, Khanna Publishers, 35th Edition, 2010.
- N.P. Bali and Manish Goyal, A text book of Engineering Mathematics, Laxmi Publications,
Reprint, 2010. - Veerarajan T., Engineering Mathematics, Tata McGraw-Hill, New Delhi, 2008.
- P. G. Hoel, S. C. Port and C. J. Stone, Introduction to Probability Theory, Universal Book
Stall, 2003 (Reprint). - S. Ross, A First Course in Probability, 6th Ed., Pearson Education India, 2002.
- W. Feller, An Introduction to Probability Theory and its Applications, Vol. 1, 3rd Ed., Wiley,
- Statistics
RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
New Scheme Based On AICTE Flexible Curricula
Electronics & Communication Engineering III-Semester
EC302 ELECTRONIC MEASUREMENTS AND INSTRUMENTATION
Unit-1 Theory of Measurement: Introduction, Characteristics of Instruments and measurement
systems (Static &Dynamic) Error analysis: Sources, types and statistical analysis. Instrument
Calibration: Comparison Method. DC and AC Ammeter, DC Voltmeter- Chopper type and solidstate,
AC voltmeter using Rectifier. Average, RMS, Peak responding voltmeters, Multi-meter,
Power meter, Bolometer and Calorimeter.
Unit-2 CRO: Different parts of CRO, Block diagram, Electrostatic focusing, Electrostatic
deflection, Post deflection acceleration. Screen for CRTs, Graticules, Vertical and Horizontal
deflection system, Time base circuit, Oscilloscope Probes, Applications of CRO, Special purpose
CROs- Multi input, Dual trace, Dual beam, Sampling, Storage (Analog and Digital) Oscilloscope
Bridges :Maxwell’s bridge (Inductance and Inductance-Capacitance), Hay’s bridge, Schering
bridge (High voltage and Relative permittivity), Wein bridge. Impedance measurement by Qmeter
Unit-3 (Transducer): Classification of Transducers, Strain gauge, Displacement Transducer
Linear Variable Differential Transformer (LVDT) and Rotary Variable Differential Transformer
(RVDT), Temperature Transducer- Resistance Temperature Detector (RTD), Thermistor,
Thermocouple, Piezo-electric transducer, Optical Transducer- Photo emissive, Photo conductive,
Photo voltaic, Photo-diode, Photo Transistor
Unit-4 Signal and Function Generators, Sweep Frequency Generator, Pulse and Square Wave
Generator, Beat Frequency Oscillator, Digital display system and indicators, Classification of
Displays, Display devices: Light Emitting diodes (LED) and Liquid Crystal Display(LCD).
Unit-5 Advantages of Digital Instrument over Analog Instrument, Digital-to-analog
conversion (DAC) – Variable resistive type, R-2R ladder Type, Binary ladder, Weighted
converter using Op-amp and transistor, Practical DAC. Analog-todigital Conversion (ADC) –
Ramp Technique, Dual Slope Integrating Type, Integrating Type (voltage to frequency),
Successive Approximations. Digital voltmeters and multi-meters, Resolution and sensitivity of
digital multi-meter.
Text/Reference Books: - Albert D. Helfrick, William David Cooper, “Modern electronic instrumentation and
measurement techniques”, TMH 2008. - Oliver Cage, “Electronic Measurements and Instrumentation”, TMH, 2009.
- Alan S. Morris, “Measurement and Instrumentation Principles”, Elsevier (Buterworth
Heinmann), 2008. - David A. Bell, “Electronic Instrumentation and Measurements”, 2nd Ed., PHI, New Delhi
2008. - H.S. Kalsi, “Electronics Instrumentation”, TMH Ed. 2004
- A.K.Sawhney, “A Course in Electrical and Electronic Measurements and
Instrumentation”, Dhanpat Rai. - MMS Anand, “Electronic Instruments & Instrumentation Technology”, PHI Pvt. Ltd.,
New Delhi Ed. 2005
RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
New Scheme Based On AICTE Flexible Curricula
Electronics & Communication Engineering III-Semester
EC303 DIGITAL SYSTEM DESIGN
Unit-1 Number Systems: Decimal, Binary, Octal and Hexadecimal systems, conversion from
one base to another, Codes-BCD, Excess- 3, Gray Reflected ASCII, EBCDIC.
Logic gates and binary operations- AND, OR, NOT, NAND, NOR, Exclusive–OR and
Exclusive– NOR Implementations of Logic Functions using gates, NAND–NOR
implementations – Multi level gate implementations- Multi output gate implementations.
Boolean postulates and laws – De-Morgan’s Theorem – Principle of Duality, Boolean function,
Canonical and standard forms,Minimization of Boolean functions, Minterm,Maxterm, Sum of
Products (SOP), Product of Sums (POS),Karnaugh map Minimization, Don’t care conditions,
Quine-McCluskey method of minimization.
Unit-2 Combinational logic circuits :Half adder – Full Adder – Half subtractor – Full
subtractor– Parallelbinary adder, parallel binary Subtractor – Fast Adder – Carry Look Ahead
adder– Serial. Adder/Subtractor – BCD adder – Binary Multiplier – Binary Divider –
Multiplexer/De-multiplexer – decoder – encoder – parity checker – parity generators –
codeconverters – Magnitude Comparator.
Unit-3. Sequential Logic Design: Building blocks like S-R, JK and Master-Slave JK FF, Edge
triggered FF, Finite state machines, Design of synchronous FSM, Algorithmic State Machines
charts. Designing synchronous circuits like Pulse train generator, Pseudo Random Binary
Sequence generator, Clock generation
Unit-4 Registers and Counters: Asynchronous Ripple or serial counter. Asynchronous
Up/Down counter – Synchronous counters – Synchronous Up/Downcounters – Programmable
counters – Design of Synchronous counters: state diagram-State table –State minimization –State
assignment – Excitation table and maps-Circuit. Implementation – Modulo–n counter, Registers –
shift registers – Universal shift registers. Shift register counters – Ring counter – Shift counters –
Sequence generators.
Unit-5 Logic Families and Semiconductor Memories: TTL NAND gate, Specifications, Noise
margin, Propagation delay, fan-in, fan-out, Tristate TTL, ECL, CMOS families and their
interfacing, Memory elements, Conceptof Programmable logic devices like FPGA. Logic
implementation using Programmable Devices.
Text/Reference Books: - Malvino & Leach, “Digital Principles and Applications”, TMH.
- M. Morris Mano, “Digital Logic Design”, PHI
- R.P. Jain, “Modern Digital Design”, TMH.
- S. Salivahanan & S. Arivazhagan, “Digital Circuits and Design”, Vikas Publishing.
- D. Roy Chaudhuri, Digital Circuits, “An Introduction Part -1 & 2”, Eureka Publisher.
- Ronald J Tocci , “Digital Systems, Principles and Applications”, PHI.
- Taub & Schilling, “Digital Integrated Electronics”, TMH.
DIGITAL SYSTEM DESIGN LAB - Study of different basic digital logic gates and verification of their Truth Table.
- Study and verification of the law of Boolean Algebra and De-Morgan’s Theorem.
- Construction and verification of various combinational circuits such as Half Adder, Full
Adder, Half & Full Subtractor. - Study of Multiplexer, De-multiplexer.
- Study of Different Code Converters, Encoder, Decoder.
- Construction and verification of various types of Flip-Flops using gates and IC’s.
- Construction and Verification of different Shift Registers.
- Construction and verification of different types of Counters.
- Study of important TTL technologies, Verifications of important TTL Circuit Parameters.
RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
New Scheme Based On AICTE Flexible Curricula
Electronics & Communication Engineering III-Semester
EC304 Electronic Devices
Unit-1 Semiconductor Material Properties: Elemental & compound semiconductor
materials , Bonding forces and Energy bands in intrinsic and extrinsic silicon, Charge carrier in
semiconductors , carrier concentration, Junction properties, Equilibrium condition, biased
junction, Steady state condition, breakdown mechanism (Rectifying Diodes, Zener Diodes),
Metal Semiconductor Junction.
Special diodes: Tunnel diodes, Varactor diodes, Schottky diode, Photo diodes, Photodetector,
LED, solar cell.
Unit-2 Diode circuits: Ideal and Practical diode, Clipper, Clamper.
Power Supply: Rectifiers-Half wave, Full wave, Bridge rectifier, filter circuits, Voltage
regulation using shunt & series regulator circuits, Voltage regulation using IC.
Unit-3 Fundamentals of BJT: Construction, basic operation, current components and
equations,CB, CE and CC configuration, input and output characteristics, Early effect, Region of
operations: active, cut-off and saturation region. BJT as an amplifier. Ebers-Moll model, Power
dissipation in transistor (Pd, max rating), Photo transistor. Transistor biasing circuits and
analysis: Introduction, various biasing methods: Fixed bias,Self bias, Voltage Divider bias,
Collector to base bias, Load-line analysis: DC and AC analysis, Operating Point and Bias
Stabilization and Thermal Runaway. Transistor as a switch.
Unit-4 Small Signal analysis: Small signal Amplifier,Amplifier Bandwidth, Hybrid model,
analysis of transistor amplifier using h-parameter, Multistage Amplifier: Cascading amplifier,
Boot-strapping Technique, Darlington amplifier and cas-code amplifier, Coupling methods in
multistage amplifier, Low and high frequency response, Hybrid πmodel, Current Mirror circuits.
Large Signal analysis and Power Amplifiers: Class A,Class B,Class AB, Class C, Class D,
Transformer coupled and Push-Pull amplifier.
Unit-5 FET construction- JFET: Construction, n-channel and p-channel, transfer and drain
characteristics, parameters, Equivalent model and voltage gain, analysis of FET in CG, CS and
CD configuration. Enhancement and Depletion MOSFET drain and transfer Characteristics. Unijunction
Transistor (UJT) and Thyristors: UJT: Principle of operation, characteristics, UJT
relaxation oscillator.
Text/Reference Books: - Millman & Halkias, “Electronic Devices And Circuits”, TMH.
- Salivahanan, Kumar & Vallavaraj, “Electronic Devices And Circuits”, TMH.
- Boylestad & Neshelsky, “Electronic Devices & Circuits”, PHI.
- Schilling & Belove, “Electronic Circuits , Discrete & Integrated”, TMH.
- Chattopadhyay & Rakhshit, “Electronic Fundamentals & Applications”, New Age
- Adel S. Sedra & Kenneth C. Smith, “Microelectronic Circuits”, OUP.
- R. A. Gayakwad, “Op-Amps And Linear Integrated Circuits”, PHI
- Theodore F. Bogart, Jeffrey S. Beasley, “Guillermo Rico Electronic Devices & Circuits”.
- Allen Mottershead, “Electronic Devices & Circuits”.
ELECTRONIC DEVICES LAB - Diode Characteristic
a) pn junction diode Characteristics and Static & Dynamic resistance measurement
from graph.
b) To plot Zener diode Characteristics curve. - Clipper Clamper
a) To plot the Characteristics curve of various clamper circuits.
b) To plot the Characteristics curve of various clamper circuits. - Half wave, full wave & bridge rectifier
a) To measure Vrms, Vdc for half wave, full wave & bridge rectifier.
b) To measure ripple factor, ratio of rectification for full wave & half wave rectifier. - Voltage regulation using zener diode shunt regulator and transistor series voltage
regulator in the following cases
a) Varying input
b) Varying load - Characteristic of BJT
a) To plot the input & output Characteristics curve in CB & CE configuration
b) To find & and Q point from the above curve.
c) To plot the Characteristics curve of various clipper circuits. - h- Parameter
To measure h- parameter (Av, Ai, Ro & Ri) in CE Amplifier - Multi Stage Amplifier
a) To plot the Characteristics curve for Direct Coupled Amplifier.
b) To plot the Characteristics curve for RC Coupled Amplifier.
c) To plot the Characteristics curve for transformer Coupled Amplifier. - FET Characteristic
a) To plot the Characteristics curve for n channel – JFET in CS configuration.
b) To find out pinch off voltage from the above characteristics curve
9 UJT Characteristic
a) To plot the Characteristics curve for UJT.
b) To determine intrinsic stand off ratio.
RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
New Scheme Based On AICTE Flexible Curricula
Electronics & Communication Engineering III-Semester
EC305 Network Analysis
Unit-1 Introduction to circuit theory: basic circuit element R,L,C and their characteristics in
terms of linearity & time dependant nature, voltage & current sources, controlled & uncontrolled
sources KCL and KVL analysis, Steady state sinusoidal analysis using phasors; Concept of
phasor & vector, impedance & admittance, Nodal & mesh analysis, analysis of magnetically
coupled circuits. Dot convention, coupling coefficient, tuned circuits, Series & parallel resonance
Unit-2 Network Graph theory: Concept of Network graph, Tree, Tree branch & link, Incidence
matrix, cut set and tie set matrices, dual networks
Unit-3 Network Theorems: Thevenins & Norton’s, Super positions, Reciprocity, Compensation,
Substitution, Maximum power transfer, and Millman’s theorem, Tellegen’s theorem, problems
with dependent & independent sources.
Unit-4 Transient analysis: Transients in RL, RC&RLC Circuits, initial& final conditions, time
constants. Steady state analysis
Laplace transform: solution of Integro-differential equations, transform of waveform synthesized
with step ramp, Gate and sinusoidal functions, Initial & final value theorem, Network Theorems
in transform domain.
Unit-5 Two port parameters: Z, Y, ABCD, Hybrid parameters, their inverse & image
parameters, relationship between parameters, Interconnection of two ports networks, Reciprocity
and Symmetry in all parameter.
Text/Reference Books: 1. M.E. Van Valkenburg, Network Analysis, (Pearson) - S P Ghosh A K Chakraborty Network Analysis & Synth. (MGH).
- http://www.nptelvideos.in/2012/11/networks-and-systems.html
REFERENCE:- 1. Sudhakar-Circuit Network Analysis & Synth(TMH). - J. David Irwin Engineering Circuit analysis tenth edition, Wiley india.
- Kuo- Network Analysis & Synthesis, Wiley India.
- Robert L Boylestad introductory Circuit analysis, Pearson
- Smarajit Ghosh, NETWORK THEORY: ANALYSIS AND SYNTHESIS (PHI).
- Roy Choudhary D; Network and systems; New Age Pub.
- Bhattacharya and Singh- Network Analysis & Synth (Pearson)
EXPERIMENTS LIST:- - To Verify Thevenin Theorem and Superposition Theorem.
- To Verify Reciprocity Theorem and Millman’s Theorem.
- To Verify Maximum Power Transfer Theorem.
- To Determine Open Circuit and Short Circuit parameters of a Two Port Network.
- To Determine A,B, C, D parameters of a Two Port Network.
- To determine h parameters of a Two Port Network.
- To Find Frequency Response of RLC Series Circuit RLC parallel Circuit and determine
resonance and 3dB frequencies. - To determine charging and discharging times of Capacitors.
RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
New Scheme Based On AICTE Flexible Curricula
Electronics & Communication Engineering III-Semester
EC306 EMI Lab
List of Experiments: - Study of Cathode Ray Oscilloscope.
- Study of displacement measurement by LVDT.
- Force measurement by strain gauge.
- Measurement of Capacitor using Q-meter.
- Measurement of Self-induction using Q-meter.
- Temperature measurement by thermistor.
- Study of optical Transducers: Photo-diode, Photo-Transistor.
- Design of digital to analog converter, R-2R ladder Type and analysis of its
characteristics. - To measurement of the unknown Inductance by using Maxwell’s bridge method.
- To measurement of the unknown capacitance by using Schering bridge method.
- To measurement of the unknown Frequency by using Wein’s bridge method.
- To measurement of the unknown Inductance by using Hay’s bridge method.
- To calculate Frequency and amplitude using CRO & Function Generator.
- To calculate Frequency using Lissajious Pattern.
- To study RVDT.
- Study of Function Generator.
- Temperature measurement by thermocouple.
- Temperature measurement by RTD.
- Study of optical Transducers: Photo conductive, Photo voltaic.
- To study digital Multimeter.